33
12.03
9
xxxxx
xxxxx
STOP
ON
OFF
1
•
Examples of possible portion sizes
(if necessary ask the service
technician):
small cup
normal cup
mug
small pot
pot
Do not actuate the delivery buttons
while the low temperature indicator
of the boiler shines, the
temperature of the beverages
would be too low.
Operation
•
Depending on how the dispenser was
adjusted by the service technician
during installation, beverage delivery
can be done as follows:
1) Portioned delivery
The volume of a portion can be pro-
grammed by the service technician. A
new beverage is only delivered when:
- the last delivery process is
completed,
- the button for the previous beverage
has been released,
- the preprogrammed interval is
completed
- a button for a new beverage has
been pressed.
2) Continuous delivery
A beverage is delivered as long as the
correponding delivery button is
pressed.
3) Portioned, continuously repeated
delivery:
A portioned amount of beverage is
continuously delivered as long as the
corresponding delivery button is
pressed.
•
The individual beverage delivery
buttons can be programmed by the
service technician.
•
Beverage delivery (except for hot
water delivery) is immediately stopped
when the stop button (1) is actuated.
(fig. 9)
BEVERAGE DELIVERY MODES
