42
12.03
1
23
22
24
DAILY CLEANING
CLEANING THE WATER TANK
The water tank must never be
subjected directly to sunlight.
The kit water tank must only be
applied as a temporary and not
as a permanent installation.
The water tank must be filled
with new drinking water every
day.
The pumps in the tank must
always be covered with water.
•
Switch off the device by means of the
main switch.
•
Unscrew the closure of the water tank.
(Fig. 22)
•
Remove the pump unit (1). (Fig. 23)
•
Clean the pump unit by means of a
soft brush and rinse it several times.
•
Empty the water tank, rinse it twice
with hot drinking water and fill it with
drinking water. (19 l)
Fill the tank with cold drinking
water only (max. 30°C).
Observe local regulations
regarding the drinking water
quality.
•
Insert the pump unit into the water
tank and close it with the closure.
Make sure that the hoses are not
bent.
•
Switch on the device and check the
correct functioning.
Cleaning and Maintenance