GTB Series
13
Dimensions and technical information are subject to change without notice
Servo Positioner Rotary Table | Unit Description
4.3 Foreseeable improper usage
Any use, setting, application or alteration of the unit beyond the stated terms in section 4.5 is defined as
improper and prohibited.
4.4 Design and components of the unit
Please contact manufacturer for detailed components or replacement parts.
4.5 Description of function
The GTB Series servo positioner rotary table is a pre-loaded-globoid rotary table designed to precisely
move heavy loads at a predetermined number of stations with zero-backlash. This unit is exactly defined as
incomplete machinery that has no specific function / output until incorporated into a complete unit.
4.6 Places of work of the operating personnel
The GTB Series Servo positioner rotary table is designed for integration into complete units.
Safe operation and control are the responsibility of the unit builder and the unit operator
4.7 Hazard Zones
Hazardous zones of the unit may only be entered by designated and authorised persons!
If several persons are working on the unit, good cooperation and close coordination of the activities is
necessary.
Electrical Energy
a) Use only original fuses with the prescribed amperage! In the event of faults in the electric power supply,
switch off the unit immediately!
b) Work on electrical installations or equipment may only be carried out by an electrician or by trained
persons under the instruction and supervision of an electrician.
c) Parts of units and installations on which inspection, maintenance and repair work is being carried out on
the electrical equipment must – if prescribed – be isolated and secured to prevent restarting. First check
that the isolated parts are no longer live, then earth and short-circuit and isolate adjacent live parts
d) The electrical equipment of the unit must be inspected and checked at regular intervals. Faults such as
loose connections or scorched cables must be remedied immediately.
