TL 1128 (TOP HOLES)
Issued August 2016
Revision No: 006
Printed in U.S.A.
Copyright 2016, Bayne Premium Lift Systems
Operation Instructions
13
LOWER HOOK ADJUSTMENT
Check the distance ( A ) ( Figure B-3 ) between the saddle and lower hooks when the lifter faceplate is in the
FULL DUMP
position. Maintain this dimension at approximately
14 1/4”
for the proper “locking” of the cart to the lifter. To adjust the
setting, loosen the jam nuts ( 1 ) on the spherical rod ends ( 2 ). Remove the bolts ( 3 ) that hold the rod ends to the lower
hooks ( 4 ). Screw the rod ends in or out as required to obtain the correct dimension at ( A ). Replace the bolts ( 3 ) and
tighten the jam nuts ( 1 ).
Figure B-3
CAUTION
The distance in Figure B-3 is an arbitrary figure based on information furnished by cart manufacturers. It is the
responsibility of the owner / operator of this equipment to adjust these dimensions to be compatible with his specific
application.
