TL 1128 (TOP HOLES)
Issued August 2016
Revision No: 006
Printed in U.S.A.
Copyright 2016, Bayne Premium Lift Systems
Actuator Assembly Instructions
26
2. Place the plunger ( 2 ) ( Figure D-2 ) into the plunger housing ( 1 ). Place the spring ( 4 ) on top of the plunger ( 2 ).
Coat the o-ring on the o-ring plug ( 9 ) with STP Oil Treatment. Screw the o-ring plug ( 9 ) into the plunger housing ( 1
) on top of the spring ( 4 ) and tighten to 30 in-lb. torque.
Figure D-2
3. Coat the o-rings on the plunger housing ( 1 ) ( Figure D-3 ) and the o-ring on the o-ring plug ( 8 ) with STP Oil
Treatment. Screw the plunger housing ( 1 ) into the top of the rack cap ( 3 ) ( Figure D-4 ) and torque to 30 in-lb.
Screw the o-ring plug ( 8 ) into the side of the rack cap ( 3 ) in the bottom port and tighten.
Figure D-3
