Instruction manual
16
Adjustments
■
Test pattern
The test pattern displays the printer configuration and must
resemble the example.
Feed a continuous roll of paper in the printer before running a
test pattern.
1 - Turn off the printer for approx. 15 seconds.
2 - Turn the printer back on while pressing the Print key.
3 - Hold the key depressed until the grey test target is printed.
To return to normal operation, turn the printer off then back on.
■
Automatic adjustment of the Media Position
Sensor (MPS)
4 - Press and hold the key for 7 seconds after printing the grey
test target.
5 - The automatic control starts and white labels are fed through
the printer.
6 - The automatic adjustment of the MPS is finished when the
printer stops.
Summary of Contents for markerm-imaje 2200
