The power cord is approximately 3 meters long and comes with either a UK, EU, US or AUS/NZ plug.
The plug has a plug top power supply unit (PSU) which means the wand operates with a low DC
voltage.
The PSU allows the Doxy to be used on any mains voltage worldwide with the appropriate plug
adapter.
4 - How to Use the Doxy Die Cast
Turning on
●
To turn on your Doxy Die Cast, plug it into a suitable power socket and briefly press the
power on/off button (3) once. The massager should begin to vibrate immediately.
Applying the Doxy to the body
●
Apply lubrication if desired and gently move the massaging head against the body in a
circular motion.
●
We recommend that you choose your prefered lubricant as long as it is NOT oil based.
●
Avoid pressing too hard with the head as this could damage the skin and will not produce a
stronger climax. Extreme lateral pressure could damage the neck of the Doxy.
Increase and decrease buttons
●
The Doxy Die Cast has different levels of intensity to choose from.
●
Increase the intensity of vibrations by pressing the increase vibrations button (4) which is
marked with the positive symbol.
●
Decrease the intensity of vibrations by pressing the decrease vibrations button (5) with the
negative symbol to decrease the power.
●
Experiment with different speeds until you achieve the desired level.
●
To scroll through the speed variations keep your finger pressed down on either the increase
or decrease button.
The Pulse Setting
●
To operate the pulse setting, turn the massager off using the ON/Off button (3).
●
Hold the power on/off button again for 3-4 seconds, release and wait.
●
As the massager comes to life, you should feel the vibrations accelerating from the lowest
setting, to the highest.
●
Use the increase and decrease buttons to vary the length of the escalating pulse
●
Turn off the pulse setting by pressing the power on/off button
●
Return to constant vibration settings by pressing the power on/off button once
Attachments
●
The Doxy Die Cast is compatible with standard wand attachments.
●
Attachments are used at the user discretion.
●
Please follow the attachment manufacturers instructions when using attachments with your
Doxy Die Cast
