TECHNICAL CHARACTERISTICS
PACKAGING CONTENT
1 WiFi active master speaker, 1 passive slave speaker, 1 power adapter, 1 speaker cable and 1 user manual.
2
3
User manual
WS 220
Description & Feature
The 2CH 6.5" WiFi Ceiling Speaker utilizes a master/slave speaker configuration,in the master speaker
there is a 2- channel Class D stereo power amplifier with speaker outlets to power the slave speaker. They
also utilize coaxial ceiling speaker system of 6.5" PP cone woofer and 1" titanium dome tweeter, supported
by a professional 2-way crossover.
This device can receive music from online streaming applications such as Spotify, Tunein, etc or from local
storage devices (computer, tablet, Smartphone, NAS ...) and make it sound synchronized in all rooms or
send different music to each room. And all controlled from 4STREAM, a free app of intuitive use and easy
configuration available in multiple languages for both iOS and Android.
Featured RJ45 network port for wired connectivity is a backup for the point where the WiFi signal is weaker.
Ideal for use in your living room,bedroom,hotel room,entertainment area,office,workspace,showroom,
restaurant, etc.
Installation
Prior to the installation, you will have to make two holes of 200mm of diameter in the ceiling of the room
to embed the speakers.
(1) Connect the passive WIFI speaker to the active one with a two-tone audio cable using the connection
(B) that it is shown below.
(2) Connect the included power supply unit to the socket (A) indicated on the amplified speaker drawing
(Active), and a red LED will light up.
(3) Press the Reset button (E) and after a few seconds it will emit an acoustic signal that indicates that
the speaker is in visible mode.
(4) Insert the speakers into their respective holes removing the metal grille and tighten the claws (C) by
the screws until it is tight and pressed to the ceiling.
SAFETY PRECAUTIONS
• Be sure to read the instructions in this section carefully before use.
• Make sure to observe the instructions in this manual as the conventions of safety symbols and messages regarded
as very important precautions are included.
• We also recommend you keep this instruction manual handy for future reference.
• Do not expose the unit to rain or an environment where it may be splashed by water or other liquids,as doing so may
result in fire or electric shock.
• Use the unit only with the voltage specified on the unit. Using a voltage higher than that which is specified may result
in fire or electric shock.
• Do not cut, kink, otherwise damage nor modify the power supply cord. In addition, avoid using the power cord in close
proximity to heaters, and never place heavy objects -- including the unit itself -- on the power cord, as doing so may result
in fire or electric shock.
• Avoid installing or mounting the unit in unstable locations, such as on a rickety table or a slanted surface. Doing so
may result in the unit falling down, causing personal injury and/or property damage.
• Should the following irregularity be found during use,immediately switch off the power,disconnect the power supply
plug from the AC outlet and contact your nearest dealer.Make no further attempt to operate the unit in this condition
as this may cause fire or electric shock.
- If you detect smoke or a strange smell coming from the unit.
- If the unit falls, or the unit case breaks.
- If the power supply cord is damaged (exposure of the core, disconnection, etc.)
- If it is malfunctioning (no tone sounds.)
WS 220
Pareja de altavoces WiFi
de doble vía ( Pasivo)
Woofer 6,5” + Tweeter 1,5”
Amplificador estéreo Clase D
20+20W RMS • 8
Resp. frecuencia: 40Hz - 20kHz (+-3dB)
A. Power socket
C. Clamping claws
B. Connection with
passive speaker
E. Reset
D. WiFi antenna
Internet
Router WIFI
WS 220
AirPlay
DLNA
UPnP
Spotify
Connect
NAS
Radio
Internet
Cloud
Dispositivos
WIFI
4STREAM
APP
Multiroom
WIFI
LAN
REFERENCE
WS 220
Speaker driver
6.5” 1.5” tweeter and crossover
Amplifiertype
Stereo Digital Class D
Rated power
20+20W RMS
Impedance
8 ohms
Frequency response
40Hz - 20kHz (+-3dB)
THD
<0,5% @1kHz.
SNR
>70dB
Inputs
1 AUX stereo by 3.5mm Jack
Material
ABS with white metal grille
Power supply
12V DC. Power adapter included
Weight
1.46 Kg (Active speaker), 1.42 Kg (Passive speaker),
0.16 Kg (Power supply unit)
Dimensions
Ø230x85 mm. Cutout: Ø200 mm
Code
100076
