The Free-field Grid, silver
The DD051 Free-field Grid on the microphone cartridge is designed
to have a linear on-axis frequency response for near-field applications
(see Fig. for frequency responses measured with the Free-field
Grid). The grid is factory mounted but can be exchanged with the
DD097 Diffuse-field Grid or the UA0777 Nose Cone. Please be extremely careful
not to touch the exposed diaphragm when changing the grids.
The Diffuse-field Grid, Black
The DD097 Diffuse-field Grid is supplied as standard. It is
designed for diffuse-field recordings, or recordings in the far field.
The grid gives a high-frequency boost on-axis of 6 dB around 15
kHz (see Fig. 5) without adding noise to the recording. This boost
gives a linear diffuse-field (far field) response up to 15 kHz.
The Close-miking Grid, Trapezoid, silver
The DD054 Close-miking Grid is available as an optional
accessory. Due to its high frequency roll-off (beginning at 1
kHz and - dB at 0 kHz) it is designed to provide a soft
and smooth high-end response, especially suitable for close
miking applications. The response is altered acoustically without adding
any noise or distortion. See Fig. 6 for frequency response.
The nose Cone, Trapezoid
The UA0777 Nose Cone is available as an optional accessory.
As with the DD097 Diffuse-field Grid, the Nose Cone is simply
screwed onto the microphone cartridge in place of the DD051
Free-field Grid. When fitted, the Nose Cone gives the microphone a
true omnidirectional response even at high frequencies (see Fig. 7) and a linear
diffuse-field response (see Fig. 5). These qualities are useful at any distance for
an even tonal balance of sound arriving at all angles of incidence, e.g. room
reverberation or several sound sources placed around the microphone. The
diaphragm is placed in a slot behind the solid cone and sound waves only
have access to the diaphragm through the side of the Nose Cone. This way the
Nose Cone prevents an on-axis, high frequency sound pressure build-up on the
microphone, which is the reason for normal flat fronted omnidirectional micro-
phones becoming more and more directional for higher frequencies. There is,
however, a slight high frequency boost on axis.
6
Summary of Contents for 4003
Page 2: ... ...
