7
loosen or tighten the connector by the cable
or its strain relief! Despite the use of Kevlar,
the cable might be damaged if twisted with
excessive force. Tighten the MicroDot using
finger torque or the recommended tighten-
ing tool only. Do not use glue.
Do not mount any other connector onto
the cable than the standard MicroDot con-
nector from DPA Microphones. The DPA
MicroDot connector is specially designed
for use with the Kevlar reinforced cable,
ensuring the maximum possible tensile
strength in the design. In case of failure,
MicroDot spare parts, assembly tool and
assembly guide can be acquired.
Various wireless systems require the use
of electronic components inside the adapter
to optimise the signal level, the DC-offset
filtering and powering of the built-in micro-
phone preamplifier. Using the adapters
from DPA Microphones ensures the correct
electronic circuit with the listed types of
wireless systems at all times. Do not attempt
to employ non-standard adapters or con-
nectors as you might damage the micro-
phone preamplifier.
A connector tightening tool is supplied
with each adapter.
MicroDot connector
Tighten here
Not here
