Mounting
Push the clasp parts together to click-lock. To unlock, push
the release button and draw apart.
Turn the necklace so the cable relief on the back points
downwards. This will make the microphone element on the
front point outwards below the throat.
Cleaning guide
The cable and protection grid are the only parts that may
be cleaned. Do not use any kind of cleaning fluid other than
demineralized water. Avoid all kinds of spray or fluids con-
taining chemical components to remove static electricity on
or close to the microphone as this could cause damage to
the electret layer. When mounting the d:screet Miniature
Microphone directly on or close to the skin of a performer,
care should be taken to avoid sweat from running into the
microphone. If the microphone gets filled up with water it
will not be damaged, but possibly turn deaf while the water is
captured inside the microphone, behind the protection grid.
Remove the water by shaking the microphone or drying it
with a piece of lint free cloth.
Note: If the microphone has been exposed to sweat, it must
be rinsed out in demineralized water and left to dry out to
recover its original specifications. Drying out the Miniature
Microphone between exposures to humidity will also help to
extend its lifetime.
