DPX8000 Series Deep Service Switching Gateway User
Configuration Guide Firewall Service Board Module v1.0
11
1.4.5
Address pool
To enter the address pool page, you choose
Firewall module > Firewall > NAT > Address pool
, as shown in
Figure1-10.
Figure1-10
Address pool
Table1-8 describes the details of address pool.
Table1-8
Address pool configuration
Item
Description
ID
Display the start IP address of address pool.
Start IP address
Configure the start IP address of address pool.
End IP address
Configure the end IP address of address pool.
Operation
Click the
copy icon and the
delete icon to do the operations.
To configure address pool configuration:
Click the
button of the address pool (except the first line of the table)
Configure the ID number
Configure the start IP of address pool
Configure the end IP of address pool
After you finished the above steps, you can click the Ok button on the upper right.
1.4.6
ALG configuration
ALG configuration means you can configure all protocols application gateway, so that it can transmit all kind
protocol packets to the destination.
To enter the ALG configuration page, you choose
Firewall module > Firewall > NAT > ALG configuration
, as
shown in Figure1-11.
