DPX8000 Series Deep Service Switching Gateway User
Configuration Guide Firewall Service Board Module v1.0
12
Figure1-11
ALG configuration
Table1-9 describes the detail of Alg configuration.
Table1-9
Alg configuration
Item
Description
Protocol
Displays the protocol name.
State
Select whether to enable or disable the protocol.
1.5 NAT_PT
Enabling the NAT_PT function, you can set the NAT_PT configuration.
To enter the ALG configuration page, you choose
Firewall module > Firewall > NAT_PT
, as shown in
Figure1-12.
Figure1-12
ALG configuration