DPX8000 Series Deep Service Switching Gateway User
Configuration Guide Firewall Service Board Module v1.0
25
Chapter 2 Load Balancing
2.1 Link Load Balancing
2.1.1
Introduction to Link Load Balancing
Link load balancing is to establish several outbound interfaces according to the link of different operator, which
taking full advantage of the resource, meanwhile it supports several link back up mutually, to ensure the network
stably working.
2.1.2
Link config
To enter the link config page, you choose
Firewall module > Load balancing > Link config
, as shown in
Figure2-1.
Figure2-1
Link load balancing
Table2-1 describes the details of link load balancing.
Table2-1
Link load balancing
Item
Description
Link outbound interface
En Enter a name in the entry of link outbound interface.
Next hop gateway
Type in an IP address in the next hop gateway item.
Network operation configuration
Configure the item of network operation configuration.
Link bandwidth (MB/S)
Configure the link bandwidth item
Health check
Type in the health check cost(cost should be in 1-255)
