DPX8000 Series Deep Service Switching Gateway User
Configuration Guide Firewall Service Board Module v1.0
13
1.6 Basic attack protection
1.6.1
Basic attack protection
Sometimes, there are some attacking packets transmitting in the network, which can disturb the host receiving
normal packets. Basic attack protection can block the attack packets and send log.
To enter the basic attack protection page, you choose
Firewall module > Basic attack protection
, as shown in
Figure1-13.
Figure1-13
Basic attack protection
Table1-10 describes the details of basic attack protection.
Table1-10
Basic attack protection
Item
Description
Attack type
Select an attack type of basic attack protection.
Threshold
Set the threshold of the basic attack protection.
Block
Click the select box of the basic attack protection, which enable the relevant
protocol attack protection.
Send log
Click the select box and then you can view the log while attack packet transmitted
through the device interface.
Number of attacks
Statistics of the attack count.
