DPtech FW1000 Series Firewall Products User Configuration Guide
3-88
Table3-21 describes the details of the OSPF neighbor information.
Table3-21
OSPF neighbor information
Item
Description
Querying item
Allows you to select an item to be queried.
Keyword
Interface information that contains keyword.
Neighbor ID
Displays the ID number of the neighbor.
Neighbor IP
Displays the IP address of the neighbor.
Priority
Displays the priority of the routing protocol.
Neighbor state
Displays the connection state of the neighbor.
To which area belongs
Displays the interface to which area belongs.
Interface name
Displays the name of the interface.
DR
Displays the DR of the interface in the area.
BDR
Displays the BDR of interface in the area.
Dead Time
Displays the Dead time that the device establish relationship with neighbors.
Established time
Displays the time that the device establish relationship with neighbors.
To configure the OSPF interface information, you should:
Select an item to be queried
Enter the keyword to be queried on the OSPF neighbor information page
Click
Query
button
3.10.7 IS-IS
3.10.7.1 Configure IS-IS
To enter the configure IS-IS page, you can choose
Basic> Network > IPv4 unicast routing > IS-IS
from
navigation tree, as shown in Figure3-51.
