DPtech FW1000 Series Firewall Products User Configuration Guide
3-105
3.12.3.3 IGMP proxy
To enter the IGMP proxy page, you can choose
Basic> Network > IPv4 multicast routing >
IGMP/IGMP
Proxy > IGMP proxy
from navigation tree, as shown in Figure3-71.
Figure3-71
IGMP Proxy
Table3-38 describes the configuration items of IGMP proxy.
Table3-38
IGMP Proxy
Item
Description
Host interface configuration
Select whether to enable IGMP proxy on the host interface.
Route interface configuration
Select whether to enable IGMP proxy on each interface.
To configure IGMP proxy configuration, you should take the following steps.
Select whether to enable IGMP proxy.
Set the host interface enable status
Set the router interface enable status
Click
Ok
button in the upper right corner on the webpage.
Note:
After you enable the IGMP Proxy function, IGMP Proxy can be used.
3.12.3.4 IGMP status
To enter the IGMP status interface, you can choose
Basic> Network > IPv4 multicast routing > IGMP status
from navigation tree, as shown in Figure3-72.
