DPtech FW1000 Series Firewall Products User Configuration Guide
3-109
Item
Description
Enable mode
Select whether to enable the PIM-SM or PIM-DM mode.
Hello interval
Select the Hello interval which counts in unit of second.
DR priority
Configure the DR priority.
BSR border
Select the enabling status of BSR border, including enable and disable.
3.12.4.2 Admin scope zone
To enter the admin scope zone page, you can choose
Basic> Network > IPv4 multicast routing > PIM > Admin
scope zone
, as shown in Figure3-77.
Figure3-77
Admin scope zone
Table3-44 describes the configuration item of Global zone configuration.
Table3-44
Global zone configuration
Item
Description
Global zone configuration
Enable/disable Global zone.
Hash mask length
Set the hash mask length.
Priority
Set the priority
To configure Global zone configuration, you can take the following steps:
Select to enable Global zone configuration and configure other configuration.
Click
Ok
button in the upper right corner on the webpage.
Table3-45 describes the configuration items of the global zone configuration.