DPtech FW1000 Series Firewall Products User Configuration Guide
1-6
Figure1-1
WEB Management Interface
!
Caution:
It is recommended that you should use IE 6.0 or higher. The resolution should be 1024 x 768 or higher.
<Backward>, <Forward> and <Refresh> are not supported on the Web management interface. If you use these
buttons, the Web page may not be displayed properly.
By default, the name of the management port is meth0_0, and the IP address is 192.168.0.1.
Both of the default username and the default password are admin. You can use the default username for the first
login, but it is strongly recommended that you should change your password. For how to change your password, see
the Section “xxxx”.
After you log in, if you don’t perform any operations within 5 minutes, the connection will timeout and go back to
the login page.
Up to 5 administrators are allowed to log in to the Web management interface at the same time.
1.2.2 Web Interface Layout
Figure1-2 shows the main page of the Web Management Interface of the FW device.
