DPtech FW1000 Series Firewall Products User Configuration Guide
12-255
Item
Description
2.Configure tracking interface:
3. Configure monitor IP:
Status
Displays the relationship of master and server.
Operation
Click
Add button or the
delete button that you can add or delete an entry of the
VRRP configuration.
To configure the VRRP configuration, you can take the following steps:
Configure a number for the back up group ID number, the range is from 0 to 255, example: 1
Configure virtual IP address for the back up group, example: 2.2.2.1
Select backup group interface, example: eth0_7
Select an authentication method including none, text, and MD5
In the advanced configuration column, configure master elect priority, announce packet sending interval,
master preempt mode, and master preempt delay configuration, example: master elect priority 20,
announcement packet interval:1s, master preempt mode: preempt, master preempt delay: 0s
After you finished the above steps, click
Confirm
button in the upper right corner on the webpage.
Note
：
Backup group ID number must be same in the same backup group.
Click
delete icon that you can delete an entry of the VRRP configuration.
Click
copy icon that you can copy an entry of the VRRP configuration.
12.1.2 Monitor IP address Object
To enter the monitor IP address object interface, you can choose
Service > High availability > VRRP
, as shown in
Figure12-3
Monitoring
Table12-2 describes the configuration items of the monitor IP address object.
