DPtech FW1000 Series Firewall Products User Configuration Guide
2-16
2.3.1 SNMP version configuration
2.3.1.1 SNMP
Simple Network Management Protocol (SNMP) is the communication rule used for the management device and
managed device in the network. It defines a series of information, method and grammar and used for the
management device access and manage to the managed device.
To enter SNMP version configuration page, you can choose
Basic > System management > SNMP configuration
from navigation tree, as shown in Figure2-12.
Figure2-12
SNMP
To configure the SNMP version configuration, you can take the following steps:
Select
Basic > System management > SNMP
configuration from navigation tree to enter the SNMP version
page.
Click the SNMPv1, SNMPv2c or SNMPv3 checkbox.
Select SNMPv1, SNMPv2c option, you should configure the read community string or the read/write
community string.
Click
Ok
button in the upper right corner on the webpage.
