DPtech FW1000 Series Firewall Products User Configuration Guide
2-17
2.3.1.2 SNMPv3 configuration
Table2-4 describes the configuration items of SNMPv3.
Table2-4
SNMPv3 configuration
Item
Description
Username
Allows you to configure a user name for the SNMPv3
Authenticate protocol
Determining that the message is from a valid source. You should select an authenticate
protocol, including none, MD5 and SHA.
Authenticate password
Configure the authenticate password.
Encryption algorithm
Mixing the contents of a package to prevent it from being read by an unauthorized source.
You should select a kind of encryption algorithm, including none, DES.
Encryption password
Configure the encryption password.
User authority
Configure the user authority.
Operation
Click
copy or
delete to do the operations.
2.3.1.3 Device information
To enter the device information page and configure the device information, you can choose
Basic > System
management > SNMP configuration
from navigation tree, as shown in Figure2-13.
Figure2-13
Device information
To configure the device information, you can take the following steps:
