DPtech FW1000 Series Firewall Products User Configuration Guide
2-32
Click
Browse
button which beside the file path, and select a configuration file to be downloaded, and click
Download
button
The downloaded configuration file displays in the configuration file list. Click the
switch icon to switch
configuration file.
A pop-up a window hit you that ‘switch the configuration, after that, the device will restart, will you continue?’
Click the
Ok
button.
To upload your configuration file to a server, you can take the following steps:
Select TFTP or FTP protocol which will be used if you upload your configuration file to the server
Configure server address to upload your configuration file, such as 10.58.241.234/test
On the server, you should run the software 3CDaemon and create a new file folder, such as test
Click Upload button beside the file name
To download a configuration file, you can take the following steps:
Select TFTP or FTP protocol which will be used if you download a configuration file from the server
Configure the server address to download the configuration file, such as 10.58.241.234/test
On the server, you should run the software 3CDaemon and select a software version to be downloaded.
Click Download beside the file path
To save configuration file on your device at regular time, you should take the following steps:
Enable the Time save device configuration option
Select unit settings
Select time settings
Note:
Please refer to the above steps if you want to save
, export
or delete
configuration file.
2.7 Hot patching
Hot patching is a kind of fast and low cost method to repair the software defect. Compare with updating software
version, the main advantage of hot patching is the running services of the device will not be disconnected, that is,
you don’t need to reboot your device that the current software of the device can be repaired.