DPtech FW1000 Series Firewall Products User Configuration Guide
3-77
Figure3-41
Detailed routing table
Table3-9 describes the configuration items of the detailed routing table.
Table3-9
Detailed routing table configuration items
Item
Description
Destination subnet
Allows you to view the destination IP address.
Subnet mask
Allows you to view the subnet mask of the destination IP address.
Gateway (Next hop)
Allows you to view the gateway (next hop) IP address.
Outbound interface
Allows you to view the interface on which IP packets are forwarded.
Status
Allows you to view the active state of the route.
Protocol
Allows you to view the method that the route is generated, including
Static, Connect, RIP, OSPF, BGP, Guard protocol.
Priority
Allows you to view the static route priority.
Cost
Allows you to view the route cost.
Type
Allows you to view the route type.
3.10.3 Equal-cost route
Equal-cost route (ECMP) is that in order to go to the same destination IP address or destination segment, multiple
route paths with the same Cost value are existed. If device supports equal-cost route, Layer 3 traffic forwarded to the
destination IP or destination segment can realize load sharing through different paths, so that the network load
balancing can be realized. If failure occurs in some paths, these paths will be replaced by others which realize route
redundancy backup function.