DPtech FW1000 Series Firewall Products User Configuration Guide
3-138
3.22 Diagnostic tools
3.22.1 Ping
Ping is used to test the reachability of a host on an Internet Protocol (IP) network and to measure the round-trip time
for messages sent from the originating host to a destination computer.
To enter the PING page, you can choose
Basic> Network > Diagnose tool > Ping
from navigation tree, as shown in
Figure3-136
Ping
To use Ping diagnose tool:
Enter the PING destination IP address
Click the Test button on the bottom right
The PING test result will be show on the interface.
3.22.2 Traceroute
Traceroute is a computer network diagnostic tool for displaying the route (path) and measuring transit delays of
packets across an Internet Protocol (IP) network.
To enter the Traceroute tool page, you can choose
Basic> Network > Diagnose tool > Traceroute
from navigation
tree, as shown in Figure3-137.
