DPtech FW1000 Series Firewall Products User Configuration Guide
4-146
Figure4-3
Configuring action
Table4-2 describes the details of how to configure action.
Table4-2
Configuring action
Item
Description
Pass
Allow packet to pass through the device.
Discard
Not allow packet pass through the device.
Rate limitation
Select rate limitation rule which will apply to the packet filtering policy.
Per IP rate limitation
Select per IP limitation rule which will apply to the packet filtering policy.
Access control
Select access control rule which will apply to the packet filtering policy.
URL filtering
Select URL filtering rule which will apply to the packet filtering policy.
Advanced filtering
Select advanced filtering rule which will apply to the packet filtering policy.
Behavior audit
Select behavior audit rule which will apply to the packet filtering policy.
Flow analysis
Select whether to enable the flow analysis.
To create packet filtering policy:
Click the
copy icon
Select source domain and destination domain in the new line
Select initiate source IP and initiate destination IP for the packet filtering policy
Select the related service and valid for the packet filtering policy
The action you can select is the pass, discard or rate limitations
