DPtech FW1000 Series Firewall Products User Configuration Guide
4-167
Table4-15
User/Mac binding
Item
Description
Binding mode
Manual configuration: add username and IP address through manual configuration.
Automatic learning: learn username and IP address from the switch.
No.
Displays the sequence number of the user/IP binding list.
Username
Configure the username of the user/IP binding list.
IP address
Configure the IP address of the user/IP binding list.
Operation
Click the
copy icon or
delete icon to do the operations.
To add user name and MAC address by manual configuration, you should take the following steps:
Click manual configuration
Enter user name and IP address
Click
Ok
button in the upper right corner on the webpage
If you want to import username and IP address in batch, click
Browse
button, and select the user/IP binding file
from your local system, click import button.
If you want to export username and IP address to a CSV file, you can click export button, then select a file path
to store your use/IP binding file, and then click
Save
button.
To add user name and MAC address automatically, you should take the following steps:
Click
Automatic learning, can also be manually configured
radio box to enable this function.
4.14.5 Binding log query
Binding log query displays the IP address and MAC address
To enter the binding log query interface, you can choose
Basic> Firewall > MAC/IP binding > MAC/IP binding
log query
, as shown in Figure4-35.
