DPtech FW1000 Series Firewall Products User Configuration Guide
7-200
7.1.5 Network Application Browsing
To enter network application browsing interface, you can choose
Service > Access control > Rate limitation >
Browsing
, as shown in Figure7-7.
Figure7-7
Network application browsing
7.1.6 Typical configuration for the Rate Limitation
7.1.6.1 Network requirement
On the firewall device, you can configure rate limitation, working mode of the network configuration is layer 3
interface, and then you can configure marketing department IP segment is 192.168.3.2-192.168.3.10, exclude the IP
address192.168.3.6, research department IP segment is 192.168.4.0/24, exclude IP address 192.168.4.8, and then
you can do the following operations:
Per IP address rate limitation for the marketing department for file transfer is that: upstream 10kbps
Rate limitation for the research and development department for the HTTP download: downstream 1Mbps
