DPtech FW1000 Series Firewall Products User Configuration Guide
7-212
7.3.5.2 Configuration requirement
The following is the network diagram for the URL configuration, as shown in Figure7-17.
Figure7-17
Advanced URL filtering
7.3.5.3 Configuration procedures
Choose
Basic > Network management > Network user group > IP user group
WAN interface: eth0/3, access method: PPPoE, type the name and password provided by ISP.
LAN interface: : eth0/0, IP address: 192.168.3.0, subnet mask: 24, eth0/5, IP address
:
192.168.4, subnet
mask:24
,
and then click the
Ok
button.
Choose
Basic > Network management > Network user group > IP address
to enter the IP address page.
Click the
add button in the upper right corner.