DPtech FW1000 Series Firewall Products User Configuration Guide
10-245
Table10-6
Proscenium management
Item
Description
Proscenium administrator
Configure the user name for proscenium administrator.
Password
Configure the password for the proscenium administrator.
Access address of proscenium
Configure the device bridge interface IP address or WAN interface address.
Email address (addressee)
Configure the e-mail address of the mail receiver(addressee)
Operation
You can copy or delete the proscenium administrator configuration by click the
copy icon
or delete icon. Click the
e-mail icon that you can send e-mail to the specific proscenium
administrator.
To configure the proscenium management configuration, you can take the following steps:
In the operation column, you can click the
copy icon
And then configure the proscenium administrator
Configure the proscenium administrator’s password.
Configure the access address of the proscenium, which is the WAN interface address or bridge address of the
device.
After you finished the above steps, click
Ok
button in the upper right corner on the webpage.
After you configured the proscenium configuration, click the
email button that proscenium administrator can
receive an email which contains the user name, password and URL. When you log into the online management
interface, you can create user information, as shown in Figure10-9.
Figure10-9
Online management for the hotel user.
Table10-7 describes the configuration items of the hotel user online management.
Table10-7
Hotel user online management
Item
Description
User name
Displays the user name of the online user.
Password
Configure the password of the online user.