DPtech FW1000 Series Firewall Products User Configuration Guide
2-13
To enter the system time interface, you can choose
Basic > System management > Device management >
Information settings
from navigation tree, as shown in Figure2-6.
Figure2-6
System time settings
To modify the system time, you can take the following steps:
Select
Device Information Settings
tab, and reconfigure time zone, date and time.
After you click
Ok
button, new settings take effect immediately.
System threshold allow user to configure the hardware utilization and temperature threshold.
To enter the device information settings and configure system threshold, you can choose
Basic > System
management >Device management > Information settings
from navigation tree, as shown in Figure2-7.
Figure2-7
System threshold
Table2-3 describes the configuration items of system threshold.
Table2-3
System threshold
Item
Description
CPU usage threshold
Set the CPU usage threshold.
Memory usage threshold
Set the memory usage threshold.
Hardware usage threshold
Set the hard disk usage threshold.
CPU temperature threshold
Set the lower limit and upper limit of the CPU temperature threshold.
