DPtech FW1000 Series Firewall Products User Configuration Guide
2-42
Reboot your device. Configurations take effect.
2.10 NTP
NTP is intended for the clock synchronization of all devices in the network, keeping time consistent for all devices,
so that the devices can provide multiple applications based on time synchronization.
To enter the NTP page, you can choose
Basic > System Management > NTP
from navigation tree, as shown in
Figure2-45
NTP configuration
Table2-22 describes the configuration items of NTP server mode.
Table2-22
NTP server mode configuration items
Item
Description
NTP server address
Configures NTP server IP address or domain name.
Master-slave server
Select whether the NTP server is a master NTP server.
NTP client subnet
Configures an IP segment for the NTP client.
Mask
Configures the subnet mask for the NTP client.
Authentication
Select whether to enable NTP client authentication.
Operation
To copy or delete NTP configuration, you can click the
copy icon and the
delete icon.
