DPtech LSW5003 Series Industrial Ethernet Switch Installation Manual
Chapter 4Starting up the switch and upgrading software
2
Figure4-2
Setting up a new connection
Enter the name of the new connection in the Name field and click <OK>. The dialog box, as shown in
Figure 4-3 displays. Select the serial port to be used from the Connect Using drop-down menu. The
serial port must be the same port connected by the console cable.
Figure4-3
Setting the connection port
Setting the connection port
Click <OK>. The Port Settings tab, shown in Figure 4-4, appears and you can set serial port parameters.
Set the following parameters:
