DPtech LSW5602 Ethernet Switch Installation Manual
Chapter1 Product Introduction
1-7
LED
Status
Description
(8)Redundancy power supply
LED (RPS)
Off
Means power supply is absent.
On
Means the inserted module in slot 1 is failure.
Slow
Flashing
(1Hz)
Means the module in slot 1 is running, which is in normal working
status.
(9)Slot LED(SLOT 1)
Fast
Flashing
(8Hz)
Means the module in slot 1 is loading software and the board is
starting.
Off
Means slot 1 isn’t inserted recognizable module or the inserted
module is failed.
Slow
flashing
(1Hz)
Means as configuration single board is running with normal working
status.
Fast
Flashing
(8Hz)
Mean software is loading or single board is starting.
(10)System LED (RUN)(Green)
Slow
flashing
(1Hz)
Means the board is working as your configuration, which is in normal
working status.
Fast
flashing
(8Hz)
Means the system is loading software or the board is initializing.
Off
Means the system has no power inputted or the single board isn’t
working normally.
(11)1000M
ethernet
optical
interfacec LED (44)(Green)
On
Means the GE optical port 44 is in connection status.
Blinking
Means the GE optical port 44 is sending and receiving data.
Off
Means the GE optical port 44 is in disconnection status.
