DPtech LSW5602 Ethernet Switch Installation Manual
Chapter1 Product Introduction
1-9
(11) 1000M ethernet optical interfce LED (44)
(12) 1000M ethernet optical interface (44)
(13) 10/100/1000M ethernet electrical interface (1)
Figure1-4
LSW5602-44GT4GC-PWR front view
(8)
(1)
(3)
(5)
(7)
(6)
(9)
(10)
(11)
LED
Status
Description
(1)10/100/1000M
Ethernet
electrical
interface
LED
(0)(Green)
On
Means electrical interface 0 is in connection status.
Blinking
Means electrical interface 0 is sending and receiving data packet.
Off
Means electrical interface 0 is in disconnection status.
(3)10/100/1000M
Ethernet
electrical
interface
LED
(1)(Green)
On
Means electrical interface 1 is in connection status.
Blinking
Means electrical interface 1 is sending and receiving data packet.
Off
Means electrical interface 1 is in disconnection status.
(5)Power LED (PWR)(Green)
On
Means the power supply is working normally.
Fast
flashing
(8Hz)
Means the power supply is failure.
Off
Means the power supply is absent.
(6)Slot LED (SLOT 0)
On
Means the module in slot 0 is failure.
Slow
flashing
(1Hz)
Means the module in slot 0 is running as configuration, which is in
normal working status.
Fast
flashing
(8Hz)
Means the module in slot 0 is loading software or the board is
initializing.
Off
Means slot 0 isn’t inserted recognizable module or the inserted
module is failure.
