DPtech LSW5602 Ethernet Switch Installation Manual
Chapter1 Product Introduction
1-28
1.5.2.3 Indicator Light
(2)
(3)
(5)
(6)
Figure1-23
DPtech LSW-2XGES operation status indicator
LED
Status
Description
(3)10GE SFP+ optical interface
link status indicator light
（
LINK
）
0
On
Means port 0 has created connection.
Off
Means port 0 hasn’t created connection.
(2) 10GE SFP+optical interface
data transceiving indicator light
（
ACT
）
0
Blinking
Means port 0 is transceiving data
Off
Means port 0 isn’t transceiving data
(6) 10GE SFP+optical interface
link status indicator light
（
LINK
）
1
On
Means port 1 has created connection.
Off
Means port 1 hasn’t created connection
(5) 10GE SFP+ optical interface
data transceiving indicator light
（
ACT
）
0
Blinking
Means port 1 is transceiving data.
Off
Means port 1 hasn’t transceiving data.
1.5.2.4 10GE Ethernet Opticial Interface
Interface board
（
LSW-2XGES
）
has two SFP+ 10GE Ethernet optical interfaces:
At the right side of the SFP+connector is the SFP+port indicator light, which displays current status of
the SFP+port.
Table 1-5 describes the attributes of the 10GE Ethernet optical interface.
