DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
10
Note:
Put your mouse cursor on an indicator, and then you can view the relevant real-time data.
2.2.3 Device settings
2.2.3.1 Device information settings
Device information settings provide system name and system modification for user. User can set system
threshold and select whether to enable remote diagnosis function according to requirement.
Select
AC > System management > Device management >Configuration > Information settings
from
navigation tree to enter the device information page, as shown inFigure2-4.
Figure2-4
Device information settings
System name function allows user to customize user name to be easily managed.
Select
AC > System management > Device management > Configuration > Information settings
from
navigation tree to enter the system name settings page, as shown in Figure2-5.
Figure2-5
System name settings
To modify system name, you should:
Select [Device information settings] Tab and enter the new system name
Click
Ok
button on the upper right corner, new settings will take effect.
