DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
16
Item
Description
SNMP v3
None: means version 3 is not authenticated and not encrypted group.
MD5
：
None (version 3 is not authenticated and not encrypted group or it authenticated but
it isn`t encrypted group
）
DES
（
All of the version 3 group
）
SHA
：
None
（
version 3 is not authenticated and not encrypted group or it authenticated but
it isn`t encrypted group
）
DES
（
All of the version 3 group
）
Note:
For the SNMP v1, SNMP v2c, it related to add a new community name. For the SNMPv3, it only adds a new group
user for the SNMP version.
Only if you select the SNMP v3 mode, authentication protocol can be selected.
For the authentication password, if you don’t select None option, you can enter the authentication password.
For the encryption algorithm, if you don’t select None option, you can enter the authentication password.
To configure SNMP version configuration, you should:
Select [SNMP configuration] tab
Select SNMP version number
In parameter setting column, you should enter community string
Click
Ok
button in the upper right corner, new configuration will take effect immediately.
2.3.1.2 Device information
Device information provides configuring device information function for users.
Select
AC > System management > SNMP
from navigation tree to enter the device information page, as
shown in Figure2-15.
Figure2-15
Device information
To configure the device information, you should
：
Select [SNMP configuration] tab
