DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
17
Configure the device information, contact information, Trap destination host relevant parameter.
Click
Ok
button in the upper right corner on the webpage, new configuration will take effect immediately.
2.3.1.3 IP address list
IP address list can allow user to define the specific administrator to have the MIB access permission.
Select
AC > System management > SNMP
from navigation tree to enter the IP address list page, as shown in
Figure2-16
IP address list
To configure the IP address list, you should:
Select [SNMP configuration] tab
In the right input box, you should configure the management administrator IP address and select subnet mask.
Click Add button to add the IP address into the left box.
Click
Ok
button in the upper right corner on the webpage, IP address list will take effect immediately.
2.4 RMON Configuration
2.4.1 Introduction to RMON
Remote Monitoring (RMON) realization is completely based on SNMP system structure, it is compatible with
the existing SNMP frame and it doesn’t modify the protocol. RMON made SNMP more effective, proactive to
monitor the remote network device, providing effective method for monitoring subnet operation. RMON can reduce
network management station and agent communication traffic, achieving simple and effective managed large scale
interconnection network.
2.4.2 Alarm entry
2.4.2.1 Alarm entry
Alarm entry is the agent device can monitor the designated variable value. When it reaches the alarm threshold,
it automatically records log and send the management device Trap information.
Select
AC > System management > RMON configuration > Alarm entry
from navigation tree to enter
Alarm entry page, as shown in Figure2-17.
