DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
22
If you want to modify administrator’s password, move your mouse to the password, and then the mouse pointer
becomes the pencil icon and then click your mouse left button to modify the password.
Make sure that the confirm password should consist with the modified password.
Click
Ok
button in the upper right corner on the webpage.
If you want to modify other properties of the administrator, such as description, permission and status you
should repeat the above steps.
To delete an administrator, you should:
Make sure the administrator to be deleted.
Click
delete icon of the administrator
Click
Ok
button in the upper right corner on the webpage.
!
Caution:
Default password can’t be used when you add an administrator. You should create the password corresponding to
the rule.
You cannot lock an administrator when you add an administrator. Normal is default status. If you want to lock an
administrator, you should change its status after you have created it successfully.
The system will prompt you when you delete an administrator, please use it carefully.
2.5.2.3 Administrator authentication settings
Administrator authentication settings allow user to set the authentication method for user logging to the Web
management interface, including local authentication, Radius authentication, Tac Plus authentication and LDAP
authentication.
Select
AC > System management > Administrator > Administrator
from navigation tree to enter the
administrator authentication settings page, as shown in Figure2-21.
