DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
51
To configure the OSPF interface information, you should:
Select an item to be queried
Enter the keyword to be queried on the OSPF neighbor information page
Click
Query
button
3.6 ARP configuration
Address Resolution Protocol (ARP) is to resolve IP address to the Ethernet MAC Address protocol. In local
area network, if the host or other network devices sent data to other host or device, it must know the network layer
address (IP address) of the receiver. But it is not enough to have an IP address, because IP data packets must be
encapsulated into a frame that can be sent through the physical network, so it needs a mapping from IP address to
physical address. So that ARP is the protocol which can meet the requirement.
3.6.1 Display ARP
Select
AC> Network management >MPLS >ARP > Display ARP
from navigation tree to enter the display ARP
configuration page, as shown in Figure3-24.
Figure3-24
Display ARP
3.6.2 Static ARP
A static ARP entry is manually configured and maintained. It cannot get aged or be overwritten by a dynamic ARP
entry.
Select
AC> Network management >MPLS >ARP > Static ARP
from navigation tree to enter the display ARP
configuration page, as shown in Figure3-25.
