DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
54
3.8 DHCP Configuration
3.8.1 Introduction to DHCP
Dynamic Host Configuration Protocol (DHCP) is a network protocol for the local network using of UDP protocol.
For administrators to use DHCP there are two purposes: the DHCP can automatically allocate IP addresses to the
local network and it also can help administrator to central managed computers.
3.8.2 DHCP server
Select
AC > Network management>MPLS > DHCP server
from navigation tree to enter the DHCP server
page, as shown in Figure3-28.
Figure3-28
DHCP Server
Table3-16 describes the configuration items of DHCP server.
Table3-16
DHCP server configuration items
Item
Description
Interface
Select an interface for dynamic allocation.
Address pool
Type an IP address segment for dynamic allocation.
Gateway address
Type the gateway addresses for the client.
Agent address
Type the agent address for the client.
DNS server
Type the DNS server addresses for the client.
WINS server
Type the WINS server addresses for the client.
Region name
Type a region name
