DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
72
And then select the source domain and destination domain
And then select the initiate source IP and initiate destination IP
Select a service for the policy filtering policy, and then select the valid time of the policy filtering policy.
In the Action column, you can select the “Pass”, “Discard” or “Rate limitation” option.
Click
Ok
button in the upper right corner on the webpage.
!
Caution:
It performs default packet filtering policy if there is no packet match packet filtering policy. The default is that
interface with higher security level can access the interface with lower security level, but interface with lower
security level cannot access higher security level interface.
5.2.2 Packet Filtering Policy Log
Packet filtering policy log query function is to query specific log in the database, but the premise is you should click
the select box before packet filtering policy, as shown in Figure5-4.
Figure5-4
Packet filtering policy log
Select
AC> Advance > Packet filtering policy > Packet filtering match number
to enter the packet filtering
match number, as shown in Figure5-5.
Figure5-5
Packet filtering match number
Table5-3 describes the details of packet filtering policy log.
