DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
78
Figure5-11
Address pool
Table5-8 describes the details of address pool.
Table5-8
Address pool configuration
Item
Description
ID
Display the start IP address of address pool.
Start IP address
Configure the start IP address of address pool.
End IP address
Configure the end IP address of address pool.
Operation
Click
copy icon, and then you can copy an address pool policy.
Click
delete icon, and then you can delete an address pool policy.
To configure address pool configuration, you should:
Click
icon of the address pool
Configure the ID number
Configure the start IP of address pool
Configure the end IP of address pool
After the above steps is finished, click
Ok
button in the upper right corner on the webpage.
5.4.6 Alg Configuration
Alg configuration means you can configure all protocols application gateway, so that it can transmit all kind
protocol packets to the destination.
Select
AC> Advance > NAT> Alg configuration
from navigation tree to enter the Alg configuration page, as
shown in Figure5-12.