DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
11
System time feature allows user to define system time and synchronize with current time.
Select
AC > System management > Device management > Configuration > Device information settings
from navigation tree from navigation tree to enter the system time configuration page, as shown in Figure2-3.
Figure2-6
System time configuration
To modify system time, you should:
Select [Device information settings] tab and then select system time and set time and date
Click
Ok
button in the upper right corner on the webpage, new settings will take effect immediately.
You can select the Chinese log option or the English log option for the log sending method.
Select
AC > System management > Device management > Configuration > Information settings
from
navigation tree to enter the log sending method page, as shown in Figure2-7.
Figure2-7
Log sending method
The VCPU configuration can configure VCPU number.
Select
AC > System management > Device management > Configuration >Information settings
from
navigation tree to enter the VCPU configuration page, as shown in Figure2-8.
Figure2-8
VCPU configuration
To set the VCPU configuration, you should:
Select [Device information settings] tab and configure the VCPU number.
Click
Ok
button in the upper right corner on the webpage, new settings will take effect immediately.
System threshold features allows user to configure system hardware utilization and temperature threshold.
