DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
70
Table5-1
Packet filtering policy configuration items
Item
Description
Serial number
Displays the serial number of the packet filtering policy.
Name
Configure a name for the packet filtering policy.
Source domain
Specify the source domain.
Destination domain
Specify the destination domain.
Originator source IP
Specify the originator source IP.
Originator destination IP
Specify the originator destination IP.
Originator source MAC
Specify the range of packet source MAC.
Originator destination MAC
Specify the range of packet destination MAC.
Service
Select a service for the packet filtering policy.
IP fragment
Select whether to permit fragment packet passing through the device
Valid time
Select a time range for the rule. By default, time range is the always. Always is the
packet filtering policy effect always.
Status
Select a status for the packet filtering policy.
Enable: packet filtering policy is enabled.
Disable: packet filtering policy is disabled.
Action
Specify whether to permit packet pass the device and further limit packet filtering
policy.
Operation
Click
copy icon to copy an entry of existing packet filtering rule.
Click
delete icon to delete an entry packet filtering rule.
Click
insert icon to insert an entry of the packet filtering policy into the packet
filtering policy table.
