DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
73
Table5-3
Packet filtering policy log
Item
Description
Serial number
Displays the policy serial number.
Time
Displays when the log is created.
Protocol
Displays the protocol of the packet filtering policy.
Source IP
Displays the source IP of the packet filtering policy.
Destination IP
Displays the destination IP of the packet filtering policy.
Source port/type
Displays the source port/type of the packet filtering policy.
Destination port/code
Displays the destination port /code of the packet filtering policy.
Inbound interface
Displays the inbound interface of the packet filtering policy.
Outbound interface
Displays the outbound interface of the packet filtering policy.
Action
Display the action of the packet filtering policy.
5.2.3 Alg Configuration
Alg configuration means you can configure all protocols application gateway, so that it can transmit all kind
protocol packets to the destination.
Select
AC> Network > Firewall > Packet filtering policy > Alg configuration
from navigation tree to enter the
Alg configuration page, as shown in Figure5-6.
Figure5-6
Alg configuration
Table5-4 describes the details of Alg configuration.