DPtech WCS 7000 Series Wireless Access Controller User Configuraiton Guide
81
Table5-10
Basic attack protection
Item
Description
Attack type
Select an attack type of basic attack protection.
Threshold
Set the threshold of the basic attack protection.
Block
Click the select box of the basic attack protection, which enable the relevant
protocol attack protection.
Send log
Click the select box and then you can view the log while attack packet transmitted
through the device interface.
Number of attacks
Statistics of the attack count.
Clear counter
Clear the attack count statistics.
Time interval
（
per second
）
Select how much time it sending log per second.
Terms interval
Select how many log it report the new log.
To configure basic attack protection, you should:
Click the select box of attack type.
Click the send log box and then click
Ok
button in the upper right corner on the webpage.
5.6.2 Basic Attack Log Query
Basic attack log query allow you to query the specific log from the database.
Select
AC> Advance > Basic attack protection > Basic attack log query
from navigation tree to enter the basic
attack log query page, as shown in Figure5-15.
Figure5-15
Basic attack log query
Table5-11 describes the details of basic attack log query.
