23
Assembly
Useful information
To simplify the transport to the site of use the unit is
delivered in several, separately packed parts. The
following individual elements are delivered (see fig. 1):
1. Left tanning segment
2. Right tanning segment
3. Tanning segment, door
4. Exhaust air unit and base panel
1
3
2
4
4
In the following, the assembly is described step by step.
Make sure to remember that the electrical connection
works must be performed by authorized experts or
locally registered electricians and that the regulations
of VDE and of the local energy supply company must
be observed.
1. Assembly of the base panel
l
The base panel is in box no. 4.
l
Place the base panel on the intended site of use
(fig. 2)
l
Make sure that the base panel is in a level position
(important for subsequent assembly).
Fig. 1
Fig. 2
2. Assembly of left and right tanning
segments
These segments are in boxes 2 (right segment) and
3 (left segment).
l
Remove left tanning segment from box no. 1 and place
it upright onto the base panel (fig. 3).
l
Remove acrylic sheet. To do this grasp the plastic
profile on the left-hand side and pull the sheet out
of the guiding (fig. 4).
Remove the two outside UV lamps next to the lon-
gitudinal supports.
Fig. 3
Fig. 4
Take all required screws from the accessories
bag.
english
