Manage Users, Enable/Disable SNMP Access
TAINY iQ
Page 109 of 147
Enter the Hostname (or IP address), port number, shared secret and
authentication protocol to reach and access the server.
Access Rights
In the protocol the access right levels of a user are numerical
coded from 1 to 15. The TAINY IQ-LTE provides three access right levels
(administrator, operator and guest).
To map the levels of the protocol to the levels of TAINY IQ-
LTE, define the minimum level the user shall have for TAINY
IQ-LTE administrator rights and the define the minimum level,
the user shall have for TAINY IQ-LTE operator rights. Below the operator
level, the user has guests’ rights only.
12.3
Configure RADIUS
Click on: the
Users
tab and select “
TACACS
+
” to open the screen.
With the authentication method RADIUS (Terminal Access Controller
Access Control System Plus), the access data for the TAINY IQ-LTE
are not saved on the device itself, but on an external server.
In the event of a registration request, the TAINY IQ-LTE forwards the
registration data to the server. The server checks the validity
of the data and reports the result back to the TAINY IQ-LTE, which then
either rejects or accepts the registration.
Activate the authentication process in this screen by setting
the parameters, the TAINY IQ-LTE needs to connect to the
server.
As soon as the service
is activated, the type of
registration can be selected from
an additional drop-down list
(
or
Local
) in the
registration.
Summary of Contents for TAINY IQ-LTE
Page 1: ...TAINY IQ LTE User Manual ...
